Pull out the pod; 2. Pull out the rubber plug on the slot; 3. Add e-liquid through the slot; 4. Before using please read the manual carefully. Please avoid getting the e-liquid into your mouth directly. To avoid e-liquid penetrating into the device and shorten its life-circle, please remove pod if the device is not going to be used for a long period. Please do not drop, throw or mishandle this product as the outer shell or inner components may become damaged.
In order to prolong the operation of your product, please keep it away from excessive temperature and humid environment. Please keep this product away from children and pregnant women. Firstly, pull out the pod, and then pull out the old coil and install a new one in the pod. This is a great method for firing your mod, as it requires very little precision, you can do it blindly, and the overall motion is more intuitive. There will be a short boot-up time, where you see the SMOK logo, and then, once all the software is booted, the settings menu will appear on the display.
To set the desired wattage or power , simply toggle the buttons up and down until you find the sweet spot for your tank. Please note: it is ALWAYS best to start way lower W than the advertised power and work your way up slowly, as this gives the coil a chance to prime properly.
Firing the mod at too high a power mode with a new coil can burn it out, and this will cost you A LOT of money in the long run. Go slow and steady. Again, you can check all of this on the SMOK site. I get through plenty of vape juice each month, testing loads of different brands. But then I tried Trailblazer which is a tobacco flavored juice that combines butterscotch and peanut butter. I highly recommend this juice. If you need after-sales service, please send e-mails to [email protected].
MAG Grip uses a spring loaded connector. Please be certain that there is nothing between the mod and the attached atomizer. While the device is off, quickly click Fire Key 5 times in 2s to turn it on. While the device is on, hold Fire Key to vape it will forced to stop working when one vaping is longer than 10s, release and press again to vape again ; Quickly press Fire Key 5 times to lock or unlock. Fast click Fire Key 5 times to clock your device. No adjustments can be made nor can the device be fired in this state.
While the device is locked, hold Fire Key for 5s, choose OFF, and the screen turns off, which means the device is power off. You may also access the option to turn off your device by the menu and selecting the option there. All the setting will be automatically saved when selected. No need to reset your performances each time the device is turned on. After startup, fast press the Fire Key 5 times to go to the battery option interface. Fast press the fire key times in 2 seconds, then you will go to the operation menu.
Then let it stand for several minutes to completely organic cotton completely saturated. Before use please read the manual carefully 2. Connect the atomizer to a power source that is suitable for its intended use. Please avoid making the e-liquid into your mouth directly 4. Please do not keep the liquid inside the atomizer if the device is not going to be used for a long period.
Please refill the tank when the e-liquid is nearly used out to avoid dry-burning of the atomizer. Please do not drop, throw or mishandle this product as the outer shell or inner components may become damaged. In order to prolong the operation of your product, please keep it away from excessive temperature and humid environment. Please keep this product away from children and pregnant women.
Underage sale is prohibited. This product is not intended for use by person under legal smoking age, nonsmokers, women who are pregnant or breastfeeding, or person with or at risk of heart disease, high blood pressure, diabetes, or taking medicine or depression asthma.
The ProColor is a beautiful device that works a lot like a smartphone than a typical box mod. Gone are the tiny selector buttons, and sometimes difficult to read LED readouts. And in their place, SMOK has opted for an easier to use after some reading of the instruction manual interface that combines a large, OLED screen on the front side? The ProColor does have more features than there are colors in the rainbow, so if you are not a fan of finding your ideal vaping settings, then the work you have to do to go through all the various options on this SMOK mod might frustrate you.
But, then again, if you do enjoy that quest to find the vaping sweet spot then the ProColor is an ideal device for you. The Big Baby tank continues to be a go-to option to pair with the various other mods out there. Inside the wonderfully colorful box the ProColor comes in, you will find standard edition :. As I mentioned up top, the ProColor functions more like a modern smartphone than most other box mods that usually have a thin OLED screen with along the side with only a few selector buttons to change only the most basic settings.
There is significantly more you can do with the ProColor than with other box mods. But first off, the ProColor is a great-looking device. It jumps out at you with vibrancy and loudness. After fiddling with the controls that oversee your vaping experience, the menu also offers options that may be a bit trite, but they do go a long way in personalizing your mod.
You can adjust the frequency of the RGB backlights and also the layout of the screen itself. And talk about personalization, the ProColor if you buy directly from the SmokTech website comes in eighteen eighteen!
0コメント